prinf 란..

Posted 2008/10/07 13:57, Filed under: 나의 길/간단한 코딩
printf function
int printf ( const char * format, ... );
<cstdio>

Print formatted data to stdout

Writes to the standard output (stdout) a sequence of data formatted as the format argument specifies. After the format parameter, the function expects at least as many additional arguments as specified in format.

Parameters

format
String that contains the text to be written to stdout.
It can optionally contain embedded format tags that are substituted by the values specified in subsequent argument(s) and formatted as requested.
The number of arguments following the format parameters should at least be as much as the number of format tags.
The format tags follow this prototype:

%[flags][width][.precision][length]specifier
Where specifier is the most significant one and defines the type and the interpretation of the value of the coresponding argument:
specifier Output Example
c Character a
d or i Signed decimal integer 392
e Scientific notation (mantise/exponent) using e character 3.9265e+2
E Scientific notation (mantise/exponent) using E character 3.9265E+2
f Decimal floating point 392.65
g Use the shorter of %e or %f 392.65
G Use the shorter of %E or %f 392.65
o Signed octal 610
s String of characters sample
u Unsigned decimal integer 7235
x Unsigned hexadecimal integer 7fa
X Unsigned hexadecimal integer (capital letters) 7FA
p Pointer address B800:0000
n Nothing printed. The argument must be a pointer to a signed int, where the number of characters written so far is stored.
% A % followed by another % character will write % to stdout.

The tag can also contain flags, width, .precision and modifiers sub-specifiers, which are optional and follow these specifications:

flags description
- Left-justify within the given field width; Right justification is the default (see width sub-specifier).
+ Forces to preceed the result with a plus or minus sign (+ or -) even for positive numbers. By default, only negative numbers are preceded with a - sign.
(space) If no sign is going to be written, a blank space is inserted before the value.
# Used with o, x or X specifiers the value is preceeded with 0, 0x or 0X respectively for values different than zero.
Used with e, E and f, it forces the written output to contain a decimal point even if no digits would follow. By default, if no digits follow, no decimal point is written.
Used with g or G the result is the same as with e or E but trailing zeros are not removed.
0 Left-pads the number with zeroes (0) instead of spaces, where padding is specified (see width sub-specifier).

width description
(number) Minimum number of characters to be printed. If the value to be printed is shorter than this number, the result is padded with blank spaces. The value is not truncated even if the result is larger.
* The width is not specified in the format string, but as an additional integer value argument preceding the argument that has to be formatted.

.precision description
.number For integer specifiers (d, i, o, u, x, X): precision specifies the minimum number of digits to be written. If the value to be written is shorter than this number, the result is padded with leading zeros. The value is not truncated even if the result is longer. A precision of 0 means that no character is written for the value 0.
For e, E and f specifiers: this is the number of digits to be printed after the decimal point.
For g and G specifiers: This is the maximum number of significant digits to be printed.
For s: this is the maximum number of characters to be printed. By default all characters are printed until the ending null character is encountered.
For c type: it has no effect.
When no precision is specified, the default is 1. If the period is specified without an explicit value for precision, 0 is assumed.
.* The precision is not specified in the format string, but as an additional integer value argument preceding the argument that has to be formatted.

length description
h The argument is interpreted as a short int or unsigned short int (only applies to integer specifiers: i, d, o, u, x and X).
l The argument is interpreted as a long int or unsigned long int for integer specifiers (i, d, o, u, x and X), and as a wide character or wide character string for specifiers c and s.
L The argument is interpreted as a long double (only applies to floating point specifiers: e, E, f, g and G).

additional arguments
Depending on the format string, the function may expect a sequence of additional arguments, each containing one value to be inserted instead of each %-tag specified in the format parameter, if any. There should be the same number of these arguments as the number of %-tags that expect a value.

Return Value

On success, the total number of characters written is returned.
On failure, a negative number is returned.

Example

/* fprintf example */
#include <stdio.h>

int main()
{
   printf ("Characters: %c %c \n", 'a', 65);
   printf ("Decimals: %d %ld\n", 1977, 650000);
   printf ("Preceding with blanks: %10d \n", 1977);
   printf ("Preceding with zeros: %010d \n", 1977);
   printf ("Some different radixes: %d %x %o %#x %#o \n", 100, 100, 100, 100, 100);
   printf ("floats: %4.2f %+.0e %E \n", 3.1416, 3.1416, 3.1416);
   printf ("Width trick: %*d \n", 5, 10);
   printf ("%s \n", "A string");
   return 0;
}

And here is the output:

Characters: a A
Decimals: 1977 650000
Preceding with blanks:       1977
Preceding with zeros: 0000001977
Some different radixes: 100 64 144 0x64 0144
floats: 3.14 +3e+000 3.141600E+000
Width trick:    10
A string


몇가지 예제이다.

예제 1.
  어렵게 구현하는 방법
    sprintf(szTmpBuffer, "%c%013d", (atoi(szAmount) >= 0) ? '+' : '-', abs(atoi(szAmount)));
  쉽게 구현하는 방법
    sprintf(szTmpBuffer, "%+014d", atoi(szAmount));
  결과값
    +0000000001234

예제 2.
   자리수를 능동적으로
    sprintf(szTmpBuffer, "%0*d", 14,   atoi(szAmount));
  결과값
   00000000001234


예제 3.
  문자열중 최대 6자리를 출력하고 싶을때, (문자열로 안 끊날때 좋음)
    sprintf(szTmpBuffer, "%.3s", "TEST!@#");
  결과값
     TES
 


좀 전에 잘 설명한 사이트를 찾았다.
http://pinge.egloos.com/4111661



크리에이티브 커먼즈 라이센스
Creative Commons License
2008/10/07 13:57 2008/10/07 13:57

Trackback URL : http://simplelife.pe.kr/tc/trackback/615


« Previous : 1 : ... 86 : 87 : 88 : 89 : 90 : 91 : 92 : 93 : 94 : ... 504 : Next »

뚜는 지금.. 사랑해사랑해
아.. 열심히 살자..
남자B형염소자리인천

Categories

전체 (504)
뚜.. 서툰.. (258)
폰 이야기 (13)
나의 길 (85)
읽을거리 (21)
사진갤러리 (124)

Recent Posts

  1. Android Studio 2.2 에서 layout 미리...
  2. mac 에서 ssh 접속시 한글 입력이 안될때.
  3. Android Studio. Zxing 라이브러리 사...
  4. 안드로이드 프로젝트를 SVN 등록시 bin...
  5. 안드로이드에서 android.annotation 를...

Recent Comments

  1. Thanhk you for this informative read... Software Engineering 2018
  2. 오전부터 이것때문에 하루 종일 고생함... choi 2016
  3. 진짜 님이 하루 죙일 겜방에 갇혀서 있... 굳굳 2015
  4. 대박 이걸 어떻게 찾으셨어요? 덕분에 ... 34524 2015
  5. 와 이건 진짜 신의한수 였네요~ 감사합... interlude 2015

Recent Trackbacks

Bookmarks

  1. ATOMOS
  2. c3cc3's Homepage
  3. 봄실
  4. 우중산보... 그 싱그러운 여유

563

274

google chart api graph

-30 days

today : 187

Site Stats

TOTAL 958166 HIT
TODAY 187 HIT
YESTERDAY 208 HIT